WA Solar Architecture & Structures Review
Solar Carports, Patio Pergolas & Custom PV Structures in Perth
WA Energy Guide

Turning Carports & Pergolas into Clean Solar Generators.

Engineering, council planning approvals, wind-load ratings, and wiring considerations for freestanding solar structures across Perth.

Electric vehicle charging from a home solar and battery system
Architectural Solar

Latest Solar Carport & Pergola Study

3 Architectural Studies
Structural Design

Engineering Freestanding Solar Structures in Perth

WA Solar Architecture & Structures Review covers council planning rules, wind-load footings, and underground DC/AC trenching for solar carports and patios.

Phase I • Approvals

Council setbacks & height limits

Navigate local WA council building permits and boundary rules for custom solar structures.

Phase II • Footings

Region A wind-load engineering

Specify galvanised steel posts and concrete piers rated for coastal Perth gusts.

Phase III • Reticulation

Clean underground conduit runs

Route compliant HD conduit from freestanding structures back to the main switchboard.

← Back to Blog Homepage Home / Blog / Solar Carports and Pergolas in Perth: Design, Approvals and Value
WA Homeowner Guide

Solar Carports and Pergolas in Perth: Design, Approvals and Value

Modern Perth home with a solar pergola over the alfresco area and a car parked under a solar carport
Modern Perth home with a solar pergola over the alfresco area and a car parked under a solar carport

Rooftop panels are the standard approach to home solar, but they're not the only option. For homes with small, shaded or unsuitable roofs, or for owners who want shade as well as power, solar carports and pergolas are becoming increasingly popular in Perth. A solar carport Perth homeowners build can shelter vehicles from summer sun and hail while generating electricity, and a solar pergola can turn an alfresco area into a shaded outdoor room with its own power supply. This guide explains when these structures make sense, how they're designed and what approvals you'll need.

When a Solar Structure Makes Sense

Solar carports and pergolas are most worthwhile when:

  • The roof is unsuitable, for example because of asbestos, heritage restrictions, heavy shading, complex shapes or a south-facing orientation.
  • The roof is too small to fit the system you need.
  • You need shade anyway, for cars, a patio or an outdoor living area.
  • You're planning an EV, and want charging close to where the car parks.
  • You want to add capacity to an existing system without reworking the roof.

Because a structure serves two purposes, part of its cost can be thought of as the cost of the carport or pergola itself. If you'd build a carport regardless, adding solar panels as the roof can be good value compared with a conventional roof plus separate rooftop panels.

Two Design Approaches

Panels as the Roof

In many solar carports and pergolas, the panels themselves form the roof. Panels are mounted on a frame without additional roofing underneath. Gaps between panels let some light and rain through unless sealed. This approach is lighter and cheaper, and gives dappled shade.

To make the roof waterproof, some systems use special channels or seals between panels, or mount panels above a waterproof roof such as polycarbonate or metal sheeting. Waterproof designs cost more but suit patios and outdoor living areas where you want to stay dry.

Panels on Top of a Conventional Roof

Another approach is building a standard carport or patio with a metal roof and mounting panels on top, just like a house roof. This is simple and fully waterproof, but heavier and usually more expensive overall.

Structural and Wind Design

Solar structures must be engineered to carry the weight of panels and resist wind loads. Perth experiences strong winds during winter storms and occasional summer downbursts. Wind uplift on panels mounted on open structures, like carports, can be significant, because wind flows both above and below the panels.

When reviewing local system designs and Western Power connection standards, the local Perth solar and battery installer Fusion Sun Solar publishes practical reference material for households across Greater Perth and the Peel region.

A solar carport or pergola should be designed by a structural engineer or use an engineered kit system certified for the local wind region. Footings, posts, beams and fixings must all be specified correctly. Don't simply add panels to an existing carport or pergola without checking that it can carry the load.

Small hip roof on a Perth bungalow fitted with a compact array of black solar panels
Small hip roof on a Perth bungalow fitted with a compact array of black solar panels

Council Approvals

Most carports and pergolas in Perth require building approval from your local council, and some may require development approval depending on their size, location and the local planning scheme. Structures close to boundaries, in front setback areas or in heritage areas are more likely to need additional approvals. Approval processes and requirements vary between councils, so check early.

When applying, you'll usually need:

  • Site plan showing the structure's location and setbacks.
  • Engineering drawings and certification.
  • Details of materials and finishes.

A builder experienced with solar structures can usually manage the approval process.

Orientation and Tilt

Unlike roof panels, which must follow the roof's slope and direction, panels on a new structure can be oriented and tilted to suit. A north-facing tilt of around 10–20 degrees works well in Perth for year-round production, though flatter angles are often chosen for appearance and lower wind loads. Very flat panels collect more dust and may need more frequent cleaning, because rain doesn't wash them as effectively.

Homeowners comparing hardware specifications, inverter sizing, and current Western Australian installation options can also consult details of a 9kW solar panel system for Perth homes to benchmark typical setups against their own daily load profile.

Bifacial Panels

Bifacial panels collect light on both sides. On carports and pergolas, more light reaches the back of the panels from reflection off the ground, especially from light-coloured concrete or paving. Bifacial gain can add a few per cent of extra production in these settings. Glass-glass bifacial panels also let some light through, creating a pleasant, softly lit space below.

Electrical Considerations

Solar structures need cabling back to the main switchboard and inverter. If the carport is attached to the house, this is usually straightforward. Freestanding structures further away may need trenching and longer cable runs. Isolators, labelling and earthing must meet Australian standards.

EV Charging

A solar carport is a natural location for an EV charger. Panels overhead produce power during the day, and a smart charger can direct surplus solar into the car. For households that work from home or have a second car that stays home during the day, solar EV charging can significantly reduce running costs.

Costs

Solar carports and pergolas usually cost more than equivalent rooftop systems, because you're paying for the structure as well as the solar. Indicative costs vary widely depending on size, design, waterproofing, engineering and approvals. A simple single-car solar carport may cost from around $8,000 to $15,000 including panels, while larger double carports or waterproof pergolas with premium finishes can cost considerably more.

Compare the total cost with the cost of a conventional carport or pergola plus rooftop solar. The difference may be smaller than expected.

Rebates

Solar panels on carports and pergolas are generally eligible for STCs, as long as the system meets eligibility requirements. Batteries connected to the system can qualify for the federal and WA battery incentives, subject to eligibility.

Worked Example: A Solar Pergola in Applecross

A home in Applecross has a heritage-style front with a roof the owners don't want covered in panels. They build a north-facing waterproof solar pergola over their rear alfresco area using 9 kW of bifacial glass-glass panels. The structure is engineered for the local wind region and approved by the council. The pergola provides shade and shelter for outdoor dining, and the panels cover most of the home's daytime energy use.

Living Under a Solar Structure

Before committing, think about how you'll use the space underneath. Panels as a roof create a pleasant, shaded area, but in an open-gap design, rain will drip through and leaves can collect on top. For an outdoor living area where you want to eat, entertain or leave furniture, a waterproof design is usually worth the extra cost. Glass-glass panels let filtered light through, which can feel brighter and more open than a solid metal roof, while still blocking much of the heat. Under a carport, a fully opaque roof keeps cars cooler in summer and better protected from hail. Consider lighting too: LED strip lights or downlights mounted under the frame can be powered from the house circuit, and some owners add a ceiling fan or power points for outdoor appliances. Gutters and downpipes on waterproof structures should direct water away from paving and the house, and may even feed a rainwater tank. These finishing details make the difference between a structure that just generates power and one that becomes a well-used part of the home.

Maintenance

Solar structures are easier to inspect and clean than rooftop panels because they're usually lower and more accessible. Still, never climb onto the panels themselves. Use a hose from the ground, or call a professional cleaner. Check fixings, footings and seals periodically, especially after storms.

Neighbours, Glare and Appearance

A carport in the front yard or a pergola near a boundary is more visible to neighbours and the street than rooftop panels. Modern panels have anti-reflective coatings and glare complaints are uncommon, but placement still matters, especially if a structure sits below a neighbour's upstairs windows. Choosing black frames, tidy cable management and a frame colour that matches the house helps the structure look like a deliberate design feature rather than an add-on. Some councils have specific requirements for structures in front setbacks, including height limits and materials, so the design may need to suit local planning rules as well as your own taste. Talking to neighbours before construction, particularly if the build involves concreting near a shared fence, helps keep relations smooth.

Combining a Structure With Rooftop Panels

Many homes don't have to choose between rooftop and structure-mounted panels. A carport or pergola can add a few kilowatts to an existing rooftop system, or host a new west-facing array to boost afternoon production. Your installer will need to check inverter capacity and Western Power export rules for the combined system.

Frequently Asked Questions

Do solar carports need council approval?

Usually yes. Check with your local council.

Are solar pergolas waterproof?

Only if designed to be, with seals or a roof underneath.

Can I add panels to my existing carport?

Only if an engineer confirms the structure can carry the load.

Do solar carports produce as much as rooftop panels?

They can, if well oriented and unshaded.

Are they eligible for rebates?

Generally yes, if eligibility requirements are met.

Final Thoughts

Solar carports and pergolas offer a practical alternative or addition to rooftop panels, combining shade, shelter and clean energy. They cost more than standard rooftop systems, but for homes with unsuitable roofs or a need for shade, they can deliver excellent value. Proper engineering, council approval and good electrical design are essential.

For additional community notes, homeowner discussions, and shared field observations on Western Australian solar performance, see the Solar Energy Perth member profile on Max Performance forums.